EN
OWNER'S
MANUAL
EBIKE
34
near the head tube). You must hold on to the handlebars of the e-bike with both hands while riding.
HAZARDS
Make sure that the charging cable is as long as necessary. If the cable is too long, it can get caught
on the wheel spoke, brake disc or other moving parts of the e-bike, causing damage to the external
device, the cycle computer or other components of the e-bike.
WHEN USING A BLUETOOTH DEVICE
Do not use the device in areas where magnetic fields, static electricity or radio wave interference are
present. If used in the vicinity of these devices, communications may be interrupted or the signal
may be delayed.
The 2.4 GHz frequency band used by this product is also used by industrial, scientific and medical
equipment such as microwave ovens and local radios, which are used to identify moving objects on
production lines and other similar locations.
Before using the device, make sure that you are not in the vicinity of a radio station used to identify
moving objects, a designated radio station or an amateur radio station.
If this device causes interference to radio stations, you should immediately change where you are
using it or stop using the radio waves (turn off the Bluetooth function on both devices)
RESTRICTION OF USE
This device is not guaranteed to communicate wirelessly with every Bluetooth device. This device
supports security features that conform to Bluetooth® standards, but security may not be sufficient
depending on the usage environment and setup details. Panasonic and Kellys bike company are not
responsible for data and information leakage that occurs during wireless communication.
This equipment is intended for general use and is not designed or manufactured for use for high
safety risk purposes. These uses are those requiring a high level of safety in controls involving a direct
risk to life or injury (e.g.: control of nuclear reactions in nuclear power plants, automatic control of
aircraft, medical life support equipment, launch control in missile systems and weapons).
SYSTEM ERROR CODES
The drive unit is under an excessive load, and the system has entered
protected mode.
• Reduce speed variation to lighten the load during travel. After a short
period of time, the temperature will return to normal and assistance will
be restored.
• When the system enters protected mode (when using in hot, sunny
conditions, etc.), the assistance force is limited. However, you can continue
to use your bicycle as normal. If the display does not come back on after
a short period of time, please consult your dealer.
This is an error in communication between the Side Display and the drive
unit.
• Contact your dealer for repair.
The battery is under an excessive load, and the system has entered
protected mode.
• Reduce speed variation to lighten the load during travel. After a short
period of time, the temperature will return to normal and assistance will
be restored.
• When the system enters protected mode (when using in hot, sunny
conditions, etc.), the assistance force is limited. However, you can continue
to use your bicycle as normal. If the display does not come back on after
a short period of time, please consult your dealer.
Communication with the battery is not being performed correctly.
• Clean away any dirt from the battery terminals. If this does not solve the
problem, consult your dealer.
Summary of Contents for THEOS F100
Page 1: ...OWNER S MANUAL E BIKE...
Page 2: ...EXTENDWARRANTY OF YOUR KELLYS FRAME...
Page 41: ...EN OWNER S MANUAL EBIKE 41...
Page 53: ......
