background image

CUSTOM FITTING YOUR P

ACK

CUSTOM FITTING YOUR P

ACK

4

5

I. Insert an open

hand between 
the hook & loop
material in front of
the packbag but
behind the waist-
belt (Figure 2C).

II. Slide the waistbelt

into the desired
position by pulling
up or pushing
down on the 
waistbelt (Figure
2D). 

III. Re-velcro the

waistbelt to the
backpanel.

Figure 2C

Figure 2D

A. FIRST weight the pack with at least 25 lb. 

(35 lb. is ideal).

B. NEXT put the pack on and tighten the waistbelt. 

Make sure you place the waistbelt in the proper 
location (Figures 2A & 2B).

2. FITTING YOUR PACK

Follow these steps IN SEQUENCE to achieve the best fit
every time you use your pack. Refer to the figure
above to identify pack parts.

Before starting, loosen all load-lifter and belt stabilizer straps.

It is recommended to wear the belt on hip bones, just under the 
rib cage. If you still prefer to wear the belt low, add one to two
inches to your torso length measurement. Figure 2A shows both
the preferred placement of the waistbelt and an example of a
belt worn low. The low position is not recommended. Once 
positioned correctly, tighten the belt to prevent it from sliding. 
(A good rule of thumb is to have the belt buckle approximately
over your belly button.)

Benefits of wearing the belt high on the waist: 

• Proper loading of the skeletal frame, further supported by

the two strongest muscle groups in the body: the 
quadriceps &  gluteals.

• Blood flow & nerves route across the front of the hips;

wearing the belt too low can restrict blood flow causing
muscle fatigue, nerve pinching and possible numbness.

Figure 2A

Figure 2B

hip bone

bottom two ribs

shoulder blade

ALUMINUM 

STAY 

provides load transfer,
strength and support.

Curved 

SHOULDER STRAPS

padded 

BACKPANEL

provide comfortable load 
support.

Adjustable, padded

WAISTBELT

can be used,

tucked away or even
removed for travel.

Adjustable height

STERNUM STRAP

helps stabilize load.

BELT STABILIZER STRAPS

on waistbelt help to

transfer and control load.

1. SUSPENSION FEATURES

The Moraine and Redwing suspension features:

belly

button

recommended
position

low
position

W

AISTBEL

T

ADJUSTMENT

Reviews: