8
Storing your preferences
The Kelvin Duo has the ability to store the settings for 3 of your favourite
wine types, saving you time if you drink a particular wine type frequently. It
will also allow you to store any manual adjustments made to temperature
for quick recall.
Once you have selected the wine you are
drinking and made any personal temperature
adjustments, whilst the display is still flashing,
hold down the memory button you wish to use
(1,2 or 3) until the LCD display has stopped
flashing.
This wine type and any adjustments made will
be stored and can be recalled at any time by
simply pressing this memory button.
Placing the transmitter clip on the bottle
It is necessary to place the transmitter clip
onto the bottle against the exterior glass.
The Kelvin Duo transmitter clip is fitted with
a conductive heat transfer pad that ensures
a good surface contact with the bottle and
improved heat transfer characteristics.
Ensure the clip is placed onto the glass
below the level of the wine in the bottle.
It maybe necessary to move the clip down
periodically as the wine is consumed.
It is suggested that the clip is completely
removed and repositioned rather than trying
to slide the clip down the bottle as this may
damage the heat transfer pad.
Push the open section of the clip against the bottle.
This will widen the aperture allowing the clip to pass onto the bottle.
Ensure the heat transfer pad is sitting firmly and squarely against the bottle.
Ensure the power switch on the clip is activated as described on page 5.
