2
5
ɿ
Loading and Unloading goods
ͤ
Only when unloading goods or taking cargo, you can lift the forks and keep a distance with the surrounding
people. Do NOT lift the forks during the driving process and ensure that the height of the forks from the ground does
not exceed 200mm.
※
When loading and unloading goods, the forks should be accurately inserted into the pallet so that the centre of
the goods gravity is consistent with the centre of the forklift.
※
When carrying an unbalanced cargo, it can easily fall, and the forklift may tip over.
※
When lifting the goods, do NOT touch the gantry to prevent pinching.
※
The cargo can only be loaded and unloaded within the maximum allowed weight and load centre of the forklift.
Please refer to the load curve for details.
ͤ
When loading and unloading heavy and over-heavy goods, you need to be very careful. For larger cargo loads,
forklifts should be equipped with backrest.
ͤ
Do not drive or tilt the mast when lifting goods.
6
ɿ
Parking precautions
ͤ
After the forklift stops, the forks should be at the lowest point and the machine should be placed in brake.
ͤ
The forklift is not allowed to park on a slope.
ͤ
The forklift should be parked at appointed locations.
ͤ
The forklift is not allowed to park at an emergency exit.
ͤ
After parking the forklift, you need to turn off the machine and take the key away.
7
ɿ
Battery loading and unloading
ͤ
You need to be careful when loading and unloading batteries and their plugs. Read the instructions carefully first
and get to know the battery section for details.
ͤ
Wear protective eyewear when replacing or charging the battery.
8
ɿ
Maintenance
Maintenance can prevent accidents, please refer to the chapter about maintenance.
All replacement spare parts should be parts approved by Kelvin Engineering Ltd. The maintenance or modification
of the forklift which will affect the safety or functions is not permitted.
