4
BOTTLE COOLER
MAINTENANCE
This cooler can be cleaned using warm water and a mild detergent. Rinse with
clean water to finish off.
Never use detergents that contain chlorine.
The lid may be cleaned in the same way as the cooler.
If a condenser and associated fan are fitted at the back bottom of the cooler,
they can gather dust and dirt. If cleaning is necessary, they should be vacuumed
with a soft brush.
Please note that the parts behind the protective grille can be hot and rotating.
TROUBLE SHOOTING
If you are having problems with your cooler, please check the following point
before calling service personnel:
•
Is the cooler connected to the power supply?
•
Is the socket switch on?
•
Is the fuse in the switch cabinet intact?
•
Has the earth leak circuit breaker (if there is one) cut out?
•
Has there been power cut?
If the cooler is in a place that is very hot or with bad ventilation, make sure to
provide adequate ventilation. If the condenser mentioned in Section Maintenance
is not clean, make sure to vacuum it.
If the above points have been checked and the cooler is still not working, please
call service personnel. Inform them the nature of the problem, the type of cooler,
serial number and item number (provided on the nameplate at the back of the
cabinet).
Do not open the cabinet, as every opening hastens the thawing point. As s rule,
the goods will not suffer damage at the first 12 hours. If more time passes, the
goods must be moved to another cooler.
DISPOSAL
When a worn-out cooler is to be disposed off, this must be done in a correct
manner, with respect to the environment. Please be aware of the rules covering
the disposal of such terms; there may be special requirements or conditions to
be observed.
Information about disposal may be obtained from:
•
your supplier;
•
the relevant authorities (the Local Authority, environmental agencies, etc.).
SPECIAL POINTS TO NOTE
The information contained in these instruction for use, was correct at the term
of printing. On account of our constant produce development, however, we
reserve the right to make changes in the cooler described here. Naturally, we
will attempt to keep instructions for use up to date.
If you are in doubt as to the correct use of the cooler, please contact your
supplier, who will be able to advise you.
The producer is not responsible for accident or problems, occurred as a result of
wrong connection of the cooler.
