12
Timer operation
Timer operation
Press the Timer button can set the auto-on/off time of the unit.
Mode ON/OFF
Fan
Quiet
1
r
e
m
i
T
r
e
m
i
T
Follow
me
Self
clean
Short
cut
LED
Swing
Direct
Turbo
To set the Auto-ON time
1. Press the Timer button till the remote controller shows Timer On
indicator “ ”, the last Auto-on setting time and the signal "h"
will be shown on the LCD display area. Now it is ready to reset
the Auto-on time to START the operation.
2. Push the UP and Down button to set desired Auto-on time.
Each time you press the button, the time increases by half an
hour between 0 and 10 hours and by one hour between 10 and
24 hours.
3. After setting the Timer On ,there will be a one second delay
before the remote controller transmits the signal to the air
conditioner. Then, after approximately another 2 seconds,
the signal "h" will disappear and the set temperature will
re-appear on the LCD display window.
WARNING
caution
•
When you select the timer operation, the remote controller
automatically transmits the timer signal to the indoor unit for
the specified time. Therefore, keep the remote controller in
a location where it can transmit the signal to the indoor unit
properly.
•
Timer setting is in half hourly intervals up to 10 hours then
hourly intervals to 24 hours.
Sleep
To set the Auto-OFF time
1. Press the Timer button till the remote controller shows Timer Off
indicator “ ”, the last Auto-off setting time and the signal "h"
will be shown on the LCD display area. Now it is ready to reset
the Auto-off time to STOP the operation.
2. Push the UP and Down button to set desired Auto-off time.
Each time you press the button, the time increases by half an
hour between 0 and 10 hours and by one hour between 10 and
24 hours.
3. After setting the Timer Off ,there will be a one second delay
before the remote controller transmits the signal to the air
conditioner. Then, after approximately another 2 seconds,
the signal "h" will disappear and the set temperature will
re-appear on the LCD display window.
