27
How to use your Stir Cooker
Before first use
Unpack your Stir Cooker carefully. Check that no transit damage has occurred and
that all the items shown in the Product Overview section are present.
We recommend that you retain your packaging so that, in the unlikely event of a
fault developing you are able to return the product in the correct packaging for
best protection.
Preparing for use
1. Before using your Stir Cooker for the first time it is good practice to wash the IN
-
NER POT, PASTA POT, STIRRER and the LID first. Simply wash with warm soapy water,
rinse and dry. Your Stir Cooker is now ready for its first use.
2. Place the BASE UNIT on a dry, level, heat resistant surface, away from the coun
-
ter edge .
3. When you connect your Stir Cooker to the mains supply you will hear a long
„beep“ and the Standby / Keep Warm LED will flash slowly.
4. You can now choose your desired programme from the list shown in the section
„Stir Cooking Functions“ below. When you press one of the function buttons the
indicator light of the function you have selected begins to flash. After 8 seconds
the selected function will begin. During the 8 second period you can select a diffe
-
rent function if you accidentally pressed the wrong button. The new function will
then begin after a further 8 seconds have elapsed.
NOTE:
The first time you use your Stir Cooker you may experience a small amount
of smoke or a slight smell. This is just the manufacturing residues burning off. It is
not a fault or a cause for concern and will soon dissipate
5. IMPORTANT: Important – Do not overfill your Stir Cooker. Always leave a space
of around 2.5cm from the top of the inner pot to allow for expansion and for the
contents to boil.
6. Only use plastic or wooden utensils for stirring etc. Metal utensils will damage
the non-stick surfaces on the pots.
