Installation Instructions Kemlan Power Flue Horizon Gas Fireplaces
Laying the fire - 850 Ceramic Log
L O G S
Only use logs supplied
by the manufacturer as
other logs may effect
combustion performance.
5 . L O C AT E L O G N O. 6 .
Place this log on the right hand
side of the burner on the rear log in front of the pilot. Charred end
facing inwards. The left hand side of the log is positioned between
the metal uprights on the side of the grate.
LOCATE LOG NO. 7.
The charred effect of the log is
positioned on the smaller coal in the centre of the burner on the
right hand side.
LOCATE LOG NO. 8.
This smaller log is placed on the top of
log NO. 2 and rests on the left hand coal in the centre of the
burner.
6 . L O C AT E L O G N O. 9 .
This log is placed on the rear
log in the centre of the burner. Charred effect facing toward the left
of the burner. The front rests on logs 2 & 3 on the join.
LOCATE LOG NO. 10.
This log is located on the rear log in
the position where the log reduces in height. The charred end is
located on the front log 3 with the charred effect facing toward the
right hand side.
4 . LOCATE LOG NO. 4.
Place it on the left side of the
rear log. Charred end facing inwards.
LOCATE LOG NO. 5.
This log is placed with the thinner edge
on the smaller coal. The charred effect is facing towards the front
of the burner. The whole log is positioned on the burner base.
P O S I T I O N I N G O F
A L L L O G S
• It is important to follow the log recommended
positioning.
• Log NO. 6, 10, 9 and 4 must be pinned to rear log
with pins provided.
• Not doing so can adversely effect the operation of
the appliance.
• This diagram shows the recommended log
positions, when viewed from above.
Summary of Contents for 1100 Cantilever
Page 1: ......