Copyright © 2002 - 2014 KEMP Technologies, Inc. All Rights Reserved. Page 10 / 37
High Availability (HA)
Feature Description
5
Setting Up HA
5.1
Set up the First Unit
To build a HA LoadMaster environment there are a number of settings that must be carefully
specified. Follow the steps below to set up HA:
1.
Log in to the LoadMaster that is desired to be the active (master) unit.
2.
In the main menu, select the
System Configuration > Miscellaneous Options
>
HA
Parameters
option.
Figure 5-1: HA Mode option
3.
Select
HA (First) Mode
in the
HA Mode
drop-down.
Figure 5-2: HA question
4.
Click
OK
on the resulting message.
Do not reboot at this time.
Figure 5-3: Shared IP address reminder
5.
Click
OK
on the resulting message reminding not to forget to set the Shared IP address.
Figure 5-4: HA settings
