Wheels
DX,RIM1 -19-27OCT08-1/1
Continued on next page
KM00321,00001E5 -19-11AUG09-1/2
Service Tires Safely
CAUTION: Explosive separation of a tire and rim
parts can cause serious injury or death.
Do not attempt to mount a tire unless you
have the proper equipment and experience
to perform the job.
Always maintain the correct tire pressure. Do not inflate
the tires above the recommended pressure.
Never weld or heat a wheel and tire assembly. The heat
can cause an increase in air pressure resulting in a tire
explosion. Welding can structurally weaken or deform
the wheel.
When inflating tires, use a clip-on chuck and extension
hose long enough to allow you to stand to one side and
NOT in front of or over the tire assembly. Use a safety
cage if available.
Check wheels for low pressure, cuts, bubbles, damaged
rims or missing lug bolts and nuts.
TS21
1
—UN—15APR13
Wheel Bolts and Nuts
After the first hour of operation and then every 50 hours of
operation, tighten wheel nuts to 350 Nm (258 lb-ft).
KM1000943
—UN—1
1AUG09
35-1
031318
PN=28
Summary of Contents for 400F Support Wheel
Page 4: ...Contents ii 031318 PN 2...
Page 38: ...Serial Number 55 2 031318 PN 38...
Page 40: ...Index Index 2 031318 PN 2...
