Attaching
KM00321,000041C -19-08APR15-1/1
KM00321,0000180 -19-16MAY12-1/1
KM00321,000016A -19-23MAY12-1/1
KM00321,0000220 -19-04OCT13-1/1
Ballasting the Forage Harvester
Depending on the configuration of forage harvester/rotary
harvesting unit, there may be considerable variations in
ballast requirements with the support wheel attached.
Always install sufficient ballast to ensure steering function
when braking while machine is in operation.
IMPORTANT: Keep adding additional weights until the
weight on the front axle of the forage harvester
(with support wheel attached) is no more than
11500 kg (25353 lb.) maximum.
KM240692
—UN—07APR15
Prior to Attaching
Operation of the support wheel requires identification by
the forage harvester software so that the return to pressure
hydraulic system may be controlled when in road mode.
The impulse for support wheel identification is triggered
as soon as the electrical wiring harness of the rotary
harvesting unit is connected to the power outlet of the
forage harvester.
Automatic Support Wheel Identification
With support wheel attached and completely locked, rod
(A) extends on both sides of the attaching frame and
transmits an impulse to the forage harvester software via
an electrical sensor.
In this way, the support wheel is identified by the forage
harvester.
IMPORTANT: For support wheel operation, the
electrical wiring harness must always be
connected to the forage harvester.
A—Rod
KM1002289
—UN—21MA
Y12
Attaching to a Rotary Harvesting Unit with
AHC (Option)
Before attaching support wheel to a rotary harvesting
unit with AHC (option), move rotary harvesting unit to
horizontal position.
15-1
031318
PN=16
Summary of Contents for 400F Support Wheel
Page 4: ...Contents ii 031318 PN 2...
Page 38: ...Serial Number 55 2 031318 PN 38...
Page 40: ...Index Index 2 031318 PN 2...
