Service
Continued on next page
KM00321,0000967 -19-04JUN19-1/3
Installing New Rotating Blades
KM380936
—UN—04JUN19
A—Yellow Blade
B—Black Blade
C—Strap
D—Cleaner (Counter-Clockwise)
E—Cleaner (Clockwise)
F— Reinforcement Strap
G—Direction of Cut
CAUTION: Before making any adjustments or
doing any service work, always:
- Switch the machine off
- Remove the key from the ignition
- Wait until all the moving parts have
come to a standstill.
IMPORTANT: The rotating blades must be installed
with their tips pointing in the direction of cut (G).
1. There are different blades.
In all, 8 blades are installed on each rotating cutter.
- 4 yellow blades (A), and
- 4 black blades (B)
2. The blades are installed in the order: 2 yellow (A),
then 2 black (B). Remember to bolt on straps (C).
IMPORTANT: Install blade with coated area up.
3. Remember to install cleaner (D) or (E) and reinforcing
straps (F) as shown in the relevant installation scheme
(I) or (II) on black or yellow blades, depending on
installing coated (I) or uncoated (II) blades. Cleaner
(D) is for counter-clockwise rotation and cleaner (E)
is for clockwise rotation.
65-5
061721
PN=96
Summary of Contents for 460plus
Page 6: ...Contents iv 061721 PN 4...
Page 108: ...Serial Number 80 2 061721 PN 108...
Page 111: ...Index Index 3 061721 PN 3...
Page 112: ...Index Index 4 061721 PN 4...
