Transport
KM00321,0000A8B -19-14MAY20-1/1
KM00321,0000934 -19-17APR19-1/1
Driving on Public Roads (Rotary Harvesting
Units without Comfort Support Wheel)
When driving on public roads, the entire area around the
crop separators must be covered with a protective guard
(A).
Protective guard (A) assembly sequence:
1. Wait until rotating blades have come to a complete
stop. Then fold up the side cutting units.
2. Place and unfold accident prevention device (C) on
the central divider point.
3. Install protective guards (A) on left and right side,
and fasten them with the rope provided with accident
prevention device.
4. The skid shoes, blades and other edges are covered
with protective cloths.
Side lamps and indicators:
As the side lamps and indicators on the forage harvester
are usually covered by the intake drums in raised position,
the accident protection device features two duplicated
position lamps/indicators (B). For the 12 V power supply,
use the 7-pole plug located on the right-hand side of the
harvester.
KM1000887
—UN—27MA
Y09
A—Shield
B—Position Lamps/Turning
Lights
C—Accident Prevention Device
Ground clearance:
When driving on public roads, the rotary harvesting unit
must be raised so that the front accident prevention device
(C) is approx. 300 mm (1 ft) above the ground surface.
Set AHC-Sensor into Transport Position
AHC-Sensors (A) must be set into transport position in
order to meet maximum transport width:
•
Swing AHC-Sensor (A) in direction of arrow.
•
Put AHC-Sensor (A) onto bolt (B).
•
Repeat on opposite side.
A—AHC-Sensor
B—Bolt
KM329456
—UN—28AUG17
KM329457
—UN—28AUG17
40-3
061721
PN=56
Summary of Contents for 460plus
Page 6: ...Contents iv 061721 PN 4...
Page 108: ...Serial Number 80 2 061721 PN 108...
Page 111: ...Index Index 3 061721 PN 3...
Page 112: ...Index Index 4 061721 PN 4...
