Lubrication and Periodic Service
OUKM001,0000012 -19-15FEB05-1/1
KM00321,0000A93 -19-15MAY20-1/1
KM00321,0000351 -19-14JUL10-1/1
Service Intervals
CAUTION: Before making any adjustments or
doing any service work, always:
- Switch the machine off
- Remove the key from the ignition
- Wait until all the moving parts have
come to a standstill.
IMPORTANT: The intervals quoted here are for average
conditions. Adverse operating conditions
may make it necessary to apply lubrication or
carry out an oil change more often.
IMPORTANT: Replace any damaged parts.
Any screws that have worked loose must be
retightened to the proper torque.
Clean grease fittings before lubrication. Replace lost or
damaged grease fittings immediately. If a new fitting fails
to take grease, remove it and check whether the grease
passage is blocked.
Perform lubrication and maintenance work mentioned in
this section before and after every harvesting season as
well.
Grease
Use grease based on NLGI consistency numbers and the
expected air temperature range during the service interval.
AVIA AVIALITH 2 EP grease is recommended.
Other greases may be used if they meet the following
specification:
NLGI Service Classification GC-LB
IMPORTANT: Some types of grease thickeners are
not compatible with others. Contact your
lubricant supplier before mixing various
types of lubricants.
KM1000899
—UN—09JUN09
Low-Viscosity Grease for Gears
The feed drum spur gear angle drives are filled with
low-viscosity grease for gears.
The following low-viscosity greases are recommended:
Manufacturer
Name
ARAL
ARALUB FDP 00
BP
ENERGREASE HT 00 EP
TEXACO
STARFAK E 900
WESTFALEN
GRESANAT X 00
Other low-viscosity greases may be used if they meet the
following:
NLGI Performance Classification NLGI 00
60-1
061721
PN=74
Summary of Contents for 460plus
Page 6: ...Contents iv 061721 PN 4...
Page 108: ...Serial Number 80 2 061721 PN 108...
Page 111: ...Index Index 3 061721 PN 3...
Page 112: ...Index Index 4 061721 PN 4...
