Lubrication and Periodic Service
KM00321,0000BA9 -19-06MAY21-1/5
Continued on next page
KM00321,0000BA9 -19-06MAY21-2/5
Changing Oil in StalkBuster™ Transmissions
Drain oil
IMPORTANT: The oil in the StalkBuster™
transmissions must be changed after the
first 50 operating hours and then every
500 operating hours.
1. Unfold the rotary harvesting unit.
2. Loosen the screw (A) and remove the rotor (B).
IMPORTANT: Before removing the drain screw (D),
make sure that the hex socket wrench is in
a good condition to prevent damage to the
head of the drain screw (D).
3. Secure the flange (C) against twisting and remove the
drain screw (D).
4. Drain oil into suitable container.
NOTE: The drained oil volume must be approximately
220 mL (7.4 oz).
A—Screw
B—Rotor
C—Flange
D—Drain Screw
KM504737
—UN—14APR21
KM504738
—UN—14APR21
KM504739
—UN—14APR21
StalkBuster is a trademark of Deere & Company
Add oil
1. Fill the oil hand pump (A) with 400 mL (13.6 oz) of the
following oil:
- Castrol Alphasyn EP 150
A—Oil Hand Pump
KM504740
—UN—14APR21
60-9
061721
PN=82
Summary of Contents for 460plus
Page 6: ...Contents iv 061721 PN 4...
Page 108: ...Serial Number 80 2 061721 PN 108...
Page 111: ...Index Index 3 061721 PN 3...
Page 112: ...Index Index 4 061721 PN 4...
