Service
KM00321,0000AA2 -19-15MAY20-1/2
KM00321,0000AA2 -19-15MAY20-2/2
Relieving Pressure at the Slip Clutches on
the Main Drive
CAUTION: Before making any adjustments or
doing any service work, always:
- Switch the machine off
- Remove the key from the ignition
- Wait until all the moving parts have
come to a standstill.
The two slip clutches (D) on the main drive protect
the rotary harvesting unit from unnecessary loads. It
is therefore important to keep these clutches properly
serviced. The torque setting is 900 Nm (663.8 lb-ft).
IMPORTANT: The following steps must be taken
before the rotary harvesting unit is put
into service for the first time, and between
harvesting seasons as well.
1. Remove cover (A). First take out screws (B).
KM1000040
—UN—04APR05
2. Tighten screws (C). This reduces pressure on the
clutch disks.
3. Rotate the clutch by hand.
IMPORTANT: If it is not possible to turn slip
clutch by hand, it has to be disassembled
and cleaned for proper function. See
”Disassemble Slip Clutch” in this Section.
4. Unscrew screws (C) as far as their threads allow
(without removing them completely).
5. Install cover (A), bolting it down with screws (B).
IMPORTANT: We recommend that you have the
slip clutches checked by your Kemper
dealer once every year.
KM1000041
—UN—04APR05
65-3
061721
PN=94
Summary of Contents for 460plus
Page 6: ...Contents iv 061721 PN 4...
Page 108: ...Serial Number 80 2 061721 PN 108...
Page 111: ...Index Index 3 061721 PN 3...
Page 112: ...Index Index 4 061721 PN 4...
