EN
1502937-00
- 55 -
3.4
Reasonably foreseeable misuse
No reasonable, foreseeable misuse is possible that could lead to dangerous
situations with personal injury when working with the product whilst
adhering to its intended use.
The operation of the product in industrial areas that do not comply with
the requirements for explosion protection is not permissible.
Furthermore, the operation is prohibited for:
1. Processes that are not in the intended use list and in which the
extracted air is:
•
is mixed with sparks, e.g. from grinding processes, which due to their
size and quantity might lead to damage to the filter media or even to a
fire;
•
mixed with liquids and the resulting contamination of the air flow with
vapours containing aerosols and oils;
•
mixed with highly flammable, combustible dust and/or with substances
that can form explosive mixtures or atmospheres;
•
is mixed with other aggressive or abrasive dust that could damage the
product and the filter elements employed;
•
is mixed with organic, toxic substances or a proportion of substances
that are released when cutting the material.
2. Outdoor locations where the product is exposed to weather conditions
because the product must only be installed in closed buildings.
If there is an outdoor variant of the product available, this may be
installed outside. Please note that additional accessories may be
required for the outdoor installation.
3.5
Markings and signs on the product
Various markings and signs are affixed to the product. If these are
damaged or removed, please replace them immediately with new ones in
the same location.
The operating company is obliged to post further markings and signs on
the product and the surrounding area if necessary.
Such notes and signs might be related, for example, to the requirement for
wearing personal protective equipment.
In the country of use, additional required safety instructions and
pictograms can be provided by the manufacturer in accordance with
applicable law.
Summary of Contents for 63200
Page 2: ...Typenschild einkleben ...
Page 476: ......
