Manual KHS Mini System Control MASTER
16
8.
Configuration
The KHS Mini System Control -MASTER- can be configured through the internal menu
driven operation or through a web server. Furthermore, the saved configurations can be
uploaded through a USB interface to the KHS Mini System Control -MASTER-.
The sample project shown below shows the basic controller types of the KHS Mini System
Control -MASTER-. The individual configuration facilities of the KHS Mini System Control
-MASTER- is elucidated using exemplary configurations of the sample project in the
following chapters (Ill 8.1 and 8.2).
After all units, as described in Chapter 6, have been mounted and electrically connected,
the actual configuration of the individual KHS Mini System Controls starts.
The sample project has one KHS Mini System Control -MASTER- and two KHS Mini
System Controls -SLAVE-. The system controls shown in Illustration 8.1 are intended to
secure the cold-water line against stagnation and leaks in a fictitious building.
Ill. 8.1 Sample project
MASTER
SLAVE 1.1
SLAVE 1.2
Water sensor 1-4; Cellar
Valve
cellar
Volume flow sensor 1;
Cellar
Valve C1;
Cellar
Valve C2;
Cellar,
GF
Consumers
Sensor cable
230V cable
CAN bus cable
Cellar
Drain + overflow
monitor 1-2; Cellar
