- 5 -
1.6.2 Connection example, flow sensor
As in the servo drives, a permanently assigned channel is selected here. Please use Channel D101. Please refer to
Chapter 3.1.5 for an exact explanation of how to assign a channel. The channel designation can be found in the
circuit diagram in the side designation (see Fig.: 1-4 a) and in the description of Channel D101 (see Fig.: 1-4 b).
The connection of the flow measurement valve has to be made in accordance with Figure 1-4 resp. as shown in
Table 3. That means, connect the brown (BN) conductor to a terminal block with the designation 5L+, the black
(BK) conductor to a terminal block with the designation 5L- and the blue (BU) conductor to Module terminal
A351/1.
Pic. 1-4 Circuit Diagram Excerpt (Throughput flow sensor D101)
a)
b)
c)
