52 / 128 – K410068602009-00
/ 08.2021 –
©
www.kemper-olpe.de
Network
To establish a connection between the PC and the KHS Mini
Control System -MASTER 2.1- using a web browser, the required
network configurations can be entered in the boxes IP address,
Subnet, Gateway, prim. DNS and sec. DNS.
Note!
You can obtain the appropriate parameters for
integration into your network from your system
administrator.
The
following parameters are configured as factory
defaults:
IP-address: 10.1.23.150
Subnet:
255.255.255.0
Gateway: 10.1.23.254
The n
etwork settings can only be loaded when the configuration
is loaded using a USB stick. They are not imported when the
configuration is loaded using the web server.
2
Program switch
With the KHS Mini Control System -MASTER 2.1- it is possible
to switch between two flushing programs. The programs can
be configured in the Operating modes menu interface and the
individual Control System can be added (see Chapter 6.4). If the
button for the program switchover is set to , the external
program switching is deactivated. If the button for the program
switchover is set to , the external program switching is
active. The names of the flushing programs can be changed with
an entry in the related box. Use the „Current operating mode“
drop-down list to manually switch the flushing programs in the
web server and to block them for maintenance purposes. Use the
„External input“ drop-down list to set the operating mode of the
external input.
Maintenance:
The two flushing programs mentioned above can be switched using the
web browser and can be blocked for maintenance purposes.
3
