Kemper MiniFill Safe Change Filter, Assembly Instruction Manual

EN 

1502730-00 

- 23 - 

1.3

Markings and signs to be affixed by operating company 

The operating company is obliged to post further notes and signs on the product and its 

surrounding area if necessary. 
Such markings and signs might be related, for example, to the requirement for wearing 

personal protective equipment. 

1.4

Safety instructions for operating staff 

Before use, the operator of the product must be instructed through information, 
instructions and training on the handling of the product and the materials and aids to be 

used. 
The product system may only be used in technically perfect condition, for its intended 

purpose, in full awareness of the safety aspects and potential dangers and in accordance 

with these instructions! All errors, especially those that may affect safety, must be removed 
immediately! 
Every person who is charged with commissioning, operation or maintenance must have 

fully read and understood these operating instructions. Once they are working on the 

machine, it is too late. This specifically applies to staff who only operate the product 

occasionally. 
The operating instructions must always be within reach of the product. 
We accept no liability for any damages or injuries caused by failure to observe these 

operating instructions. 
The relevant accident prevention regulations and other generally recognized safety and 

health rules and regulations are to be complied with. 
It is important to clearly define and maintain responsibility for the different activities in 

matters of servicing and maintenance. Only then will human error – especially in 

dangerous situations – be avoided. 
The operating company is to enforce wearing of personal protective equipment by 

operating and maintenance staff. These include in particular safety shoes, safety glasses 
and gloves. 
Do not wear loose, long hair, loose clothing or jewellery! In theory, there is a risk of getting 

caught on something, or even being pulled in or torn at moving parts! 
If there are any safety-related changes to the product, immediately halt the process, secure 

it and report the occurrence to the relevant authority/person! 
Work on the product may only be carried out by reliable, trained staff. Observe the 

minimum legal age! 
Staff who require training, teaching or instructing or staff who undergo a general 

apprenticeship may only operate the product under the supervision of an experienced 

member of staff!