Lubrication and Maintenance
KM00321,0000910 -19-11APR19-1/1
KM00321,0000911 -19-11APR19-1/1
KM00321,0000912 -19-11APR19-1/1
Transmission Oil
Use oil with a viscosity based on the expected air
temperature range during the period between oil changes.
Transmission oils must meet API Service Classification
GL-5.
TS1653
—UN—14MAR96
Alternative and Synthetic Lubricants
Conditions in certain geographical areas may require
lubricant recommendations different from those printed in
this manual.
Some lubricants may not be available in your location.
Consult your KEMPER dealer to obtain information and
recommendations.
Synthetic lubricants may be used if they meet the
performance requirements as shown in this manual.
The temperature limits and service intervals shown in
this manual apply to both conventional and synthetic
lubricants.
Re-refined base stock products may be used if the
finished lubricant meets the performance requirements.
Lubricant Storage
Your equipment can operate at top efficiency only when
clean lubricants are used.
Use clean containers to handle all lubricants.
Store lubricants and containers in an area protected from
dust, moisture, and other contamination. Store containers
on their side to avoid water and dirt accumulation.
Make certain that all containers are properly marked to
identify their contents.
Properly dispose of all old containers and any residual
lubricant they may contain.
55-2
022520
PN=53
Summary of Contents for Pickup C3003
