Safety
DX,SERV -19-28FEB17-1/1
KM00321,00008FE -19-02APR19-1/1
Practice Safe Maintenance
Understand service procedure before doing work. Keep
area clean and dry.
Never lubricate, service, or adjust machine while it is
moving. Keep hands, feet, and clothing away from
power-driven parts. Disengage all power and operate
controls to relieve pressure. Lower equipment to the
ground. Stop the engine. Remove the key. Allow machine
to cool.
Securely support any machine elements that must be
raised for service work.
Keep all parts in good condition and properly installed.
Fix damage immediately. Replace worn or broken parts.
Remove any buildup of grease, oil, or debris.
On self-propelled equipment, disconnect battery ground
cable (-) before making adjustments on electrical systems
or welding on machine.
On towed implements, disconnect wiring harnesses from
tractor before servicing electrical system components or
welding on machine.
Falling while cleaning or working at height can cause
serious injury. Use a ladder or platform to easily reach
each location. Use sturdy and secure footholds and
handholds.
TS218
—UN—23AUG88
Avoid High-Pressure Fluids
Escaping oil under pressure can have sufficient pressure
to penetrate the skin, causing serious personal injury.
Avoid the hazard by relieving pressure before
disconnecting hydraulic or other lines. Check and tighten
all connections before applying pressure.
Hydraulic oil escaping from pin-holes is difficult to detect,
so use a piece of cardboard to search for leaks. Protect
hands and body from high-pressure fluids.
If an accident occurs, see a doctor immediately. Any fluid
injected into the skin must be surgically removed within
a few hours or gangrene may result. Doctors unfamiliar
with this type of injury should reference a knowledgeable
medical source.
X981
1
—UN—23AUG88
05-5
022520
PN=14
Summary of Contents for Pickup C3003
