Lubrication and Maintenance
CC,630APU003833 -19-25AUG97-1/1
KM00321,000090F -19-11APR19-1/1
KM00321,0000911 -19-11APR19-1/1
Lubrication Intervals
Using self propelled forage harvester hour meter as a
guide, perform services at the hourly intervals indicated
on following pages.
IMPORTANT: The recommended lubrication intervals
are based on normal conditions. Severe or
unusual conditions may require more frequent
lubrication or oil changes.
Clean grease fittings before using grease gun. Replace
any lost or broken fittings immediately. If a new fitting fails
to take grease, replace it or check whether the grease
passage is blocked.
CAUTION: Do not attempt to clean, lubricate
or adjust the pickup while the harvester
engine is running.
CC000934
—UN—05APR95
Grease
Use grease based on NLGI consistency numbers and the
expected air temperature range during the service interval.
AVIA AVIALITH 2 EP grease is recommended.
Other greases may be used if they meet the following
specification:
NLGI Service Classification GC-LB
IMPORTANT: Some types of grease thickeners are
not compatible with others. Contact your
lubricant supplier before mixing various
types of lubricants.
KM1000899
—UN—09JUN09
Alternative and Synthetic Lubricants
Conditions in certain geographical areas may require
lubricant recommendations different from those printed in
this manual.
Some lubricants may not be available in your location.
Consult your KEMPER dealer to obtain information and
recommendations.
Synthetic lubricants may be used if they meet the
performance requirements as shown in this manual.
The temperature limits and service intervals shown in
this manual apply to both conventional and synthetic
lubricants.
Re-refined base stock products may be used if the
finished lubricant meets the performance requirements.
55-1
010421
PN=50
Summary of Contents for Pickup N3003
Page 4: ...Introduction 010421 PN 4...
Page 6: ...Introduction 010421 PN 6...
Page 67: ...Index Index 3 010421 PN 3...
Page 68: ...Index Index 4 010421 PN 4...
