Lubrication and Maintenance
KM00321,0000912 -19-11APR19-1/1
KM00321,0000913 -19-11APR19-1/1
KM00321,0000A5B -19-22APR20-1/1
Lubricant Storage
Your equipment can operate at top efficiency only when
clean lubricants are used.
Use clean containers to handle all lubricants.
Store lubricants and containers in an area protected from
dust, moisture, and other contamination. Store containers
on their side to avoid water and dirt accumulation.
Make certain that all containers are properly marked to
identify their contents.
Properly dispose of all old containers and any residual
lubricant they may contain.
Mixing Lubricants
In general, avoid mixing different brands or types of oil.
Oil manufacturers blend additives in their oils to meet
certain specifications and performance requirements.
Mixing different oils can interfere with the proper
functioning of these additives and degrade lubricant
performance.
Consult your KEMPER dealer to obtain information and
recommendations.
Every 10 Hours — Drive Chains
Lubricate with SAE 30 engine oil.
Re-tension drive chains every 10 operating hours (see
Adjusting the Drive Chains in Service Section).
KM409042
—UN—22APR20
55-2
010421
PN=51
Summary of Contents for Pickup N3003
Page 4: ...Introduction 010421 PN 4...
Page 6: ...Introduction 010421 PN 6...
Page 67: ...Index Index 3 010421 PN 3...
Page 68: ...Index Index 4 010421 PN 4...
