KEMPER ProfiMaster Instruction Manual -
EN
Product number: 150 2464
- 70 -
rev.:
2
Technical changes and errors reserved.
Status as of: 05/2015
9.3 Declaration of conformity
Within the meaning of Directive 2006/42/EC on Machinery
Manufacturer:
KEMPER
GmbH
Von-Siemens-Str. 20
D-48691 Vreden
Mr. Manfred Könning is authorized to compile the technical documents.
We hereby declare that the following machine is in conformity with the relevant provisions of European Directive
2006/42/EC on Machinery.
Serial No.
60 650
(in case of different serial number in different versions of the device)
Designation:
KEMPER ProfiMaster IFA
KEMPER ProfiMaster
This machine is also in accordance with the relevant provisions of the following EC Directives:
2006/42/EC
Machinery Directive
2004/108/EC
Electromagnetic Compatibility
2006/95/EC
Directive on Electrical Equipment Designed for Use Within
Certain Voltage Limits
93/68/EEC
Directive on the Use of the CE Conformity Marking
The following harmonized standards (or parts thereof) were applied:
EN ISO 12100 Part 1+2, EN 294,
EN 349, EN418, EN 983
Safety of Machinery
EN 1050
Safety of Machinery - Principles for Risk Assessment
EN 60204 -1
Electrical Equipment of Machines
EMVG
The Act on Electromagnetic Compatibility of Machinery
EN 610000-6 Part 3
Basic Professional Standards for Emitted Interference
EN 610000-6 Part 2
Basic Professional Standards for Interference Resistance
The following technical specifications (or parts of these standards) were applied:
VDE 0100
Establishment of Low Voltage Equipment
VDE 0113
Electrical Equipment of Machines - Glossary to Standard EN
60204-1
UVV BGV A1
Accident Prevention Regulation: Principles of prevention
BGR 500 2.26
Welding, Cutting and Related Methods
DIN 45635
Noise Measurement on Machinery
Annex No. VIII to the Directive 2006/42/EC was observed. Compliance with the requirements under the
Directive on electrical equipment designed for use within certain voltage limits was ensured according to Annex
I, No. 1.5.1 of Directive 2006/42/EC.
Additional information:
Declaration of Conformity expires in the event of use contrary to the intended purpose or in the event of
implementation of structural changes that have not been confirmed by us as the manufacturer.
Vreden, 05. 05. 2015
KEMPER GmbH
Dipl.-Ing. M. Könning
(Head of Technical Department)
