MasterTig 535ACDC
Operating manual - EN
Warning and notification symbols:
a.
Cooling unit
•
Green: Cooling unit is connected and running
•
Red: Cooling unit is connected, but there is a problem (e.g. coolant circulation is restricted)
b.
General notification
•
Yellow: This is a warning that requires attention
•
Red: There is an error that prevents welding
•
Error code is shown below the symbol
c.
Operating temperature
•
Red: Welding equipment has overheated
d.
VRD (voltage reduction device)
•
VRD symbol on: VRD is on
>> This is always on in power source models where the VRD function is locked on.
•
VRD symbol red (blinking): There is a fault with VRD that prevents welding
•
VRD symbol off: VRD is off.
Tip:
You can switch between the home view and the previously used view by long pressing the menu button.
3.2.2 Weld Assist view
Weld Assist is a wizard-like utility for easy selection of welding parameters. The utility walks the user step-by-step
through the selection of required parameters, presenting the selections in an easily understandable way for a non-tech-
nical user.
The Weld Assist feature is available for both TIG and MMA welding. In Weld Assist, the selections are made with the con-
trol knob (1) and with the two function buttons (2, 3):
© Kemppi
34
1921940 / 2140
