Cool X
4
EN
2.
INSTALLATION
2.1 Removal from packaging
The equipment is packed in durable packages specially designed for them. Check the
equipment before taking it into use, to make sure that the equipment or a part of it have not
got damaged during the transportation. Also check that the delivery corresponds your order
and that you have received all the necessary instructions for installing and operating the
equipment. The packaging material can be recycled.
2.2 Locating the machine
Place the machine on a horizontal, stable and clean ground. Protect the machine from heavy
rain and burning sunshine. Check that there is enough space for cooling air circulation in front
of and behind the machine.
2.3 Serial number
The serial number of the machine is marked on the machine CE-marking. Identificating the
serial number is the only proper means of maintaining and identifying parts for a specific
product. It is important to make correct reference to the serial number of the product when
making repairs or ordering spare parts.
2.4 Installation and main parts
2.4.1 Assembling the equipment
The equipment is assembled in the following order:
1.
Transport unit PM500
6185291
2.
Cooling unit Cool X
6068200
Assembly the transport unit according to the instructions in the package. Fasten the cooling
unit to the transport unit by using the screws and bolts delivered with the equipment.
2.4.2 Main parts of cooling unit
A
B
C
D
E
F
G
H
Front machine
A.
Housing
B.
Test switch
C.
Overheat control lamp
D. Filling hole
Back side
E.
Mains voltage connection cable
F.
Control cable
G.
Cooling water output hose
H. Cooling water input hose
