Service manual Minarc Evo 150 and 180
Version 1.3
30.9.2015
13
Kemppi Oy
Moving from parameter to parameter can be done by combining the Remote ON/OFF and TIG/MMA
buttons in the following sequence.
Picture2. Moving between parameters.
Parameter 2: Current multiplier
(150A)
Parameter 3: Display current
offset min. (10A)
2. Press to go to the next
parameter
1. Press and hold
Moving to next parameter:
Parameter 2: Current multiplier
(150A)
Parameter 3: Display current offset
min. (10A)
2. Press to go to the next
parameter
1. Press and hold
Moving to previous parameter: