2
Thank you for your purchase of a Ken-A-Vision PupilCAM! This high-resolution
camera captures microscopic images and displays them on your computer
with full screen viewing. The pre-attached cable provides a direct interface to
your equipment. It’s ready to go, no assembly required!
Connecting The USB Cable to Your Computer
Prior to connecting the USB cable, you must first install the supplied software.
Pre-attached cabling makes it easy to connect the USB cable to you computer.
Simply insert the rectangular end of the USB cable to the USB port of your
computer.
Note: The USB port will supply ample power to the the PupilCAM
®
. No power
additional power supply is required.
Connecting to a Microscope
The PupilCAM
®
is designed exclusively to work with a microscope (compound
or stereoscope). A variable eyepiece adapter is built-in to the camera.
Gently twist the PupilCAM® as you push it down onto the microscope.
1401KRM/1402KRM models feature a rubber adapter that fits snuggly over
28mm microsocope eyepieces.
1401KEM/1402KEM models feature a built-in 10x eyepiece that is inserted
into 23mm microsocope eyepiece tubes or 30mm eyepiece tubes with the
included adapter.
All focusing should be done using the microscope focus knobs.
