background image

16

Oven Controls

Setting The Clock

When the appliance is first powered up, 12:00 will flash in the 
display (

Figure 10

). The time of day must first be set before 

operating the oven.

To set clock to 1:30:

1.

Press Set Clock.

2. Enter 1 3 0 using numeric keys.

3. Press .

Important note: 

The clock cannot be changed when a Cook Time, Self Clean, 
Delay Start or cooking feature is active.

Changing Oven Temperature Display

The oven control is preset for temperatures in °F (Fahrenheit) 
when shipped from the factory. The control can be changed to 
display either Fahrenheit or Celsius.

To change the display to F (Fahrenheit) or C (Celsius):

1.

Press and hold Broil for 6 seconds.

2. Once F (or C) appears in the display, press Self Clean to 

toggle between Fahrenheit and Celsius temperature display 
modes.

3. Press 

 to accept choice.

Important note: 

The oven temperature display cannot be changed during the 
cooking process or if a Delay Start has been set or Self Clean is 
active.

Setting 12 hour or 24 hour display mode

The clock display mode allows you to select 12 hr or 24 hr 
modes. The factory pre-set clock display mode is 12 hours.

 To set 12 hr or 24 hr display mode:

1.

Press and hold Set Clock for 6 seconds.

2. Press Self Clean to toggle between 12 Hr day or 24 Hr day 

display modes. (

Figure 12

)

3. Press 

to accept choice.

Changing Between Continuous Bake Setting or 12 Hour 

Energy Saving 

The oven control has a factory preset built-in 12 Hour Energy 
Saving feature that will turn off the oven if the oven is left on for 
more than 12 hours. The control may be programmed to 
override this feature to bake continuously.

To change between continuous bake or 12 Hour Energy Saving 
feature:

1.

Press and hold Timer Set-Off for 6 seconds

2. Press Self Clean to toggle between 12 Hour OFF or Stay On 

(

Figure 13

) feature.

3. Press 

 to accept choice

Figure 10:  12:00 in display before setting clock

Figure 11:  Display showing Fahrenheit and Celsius

Figure 12:  12 Hr dAy and 24 Hr dAy settings

Figure 13:  12 hr energy saving (L) and continuous setting (R)

Summary of Contents for 970C4254






































Reviews: