![background image](http://html1.mh-extra.com/html/kencove/pd80/pd80_operators-manual_663681015.webp)
14
REV.3.20.14
KD-27
15.
Align spring and install onto two (2)
road lock bracket bolts.
16.
Align and install ram cylinder
mounting bracket onto two (2) road
lock bracket bolts.
17.
Install two (2) 3/8-16 locknuts onto
bolts. Do not tighten at this time.
18.
Tighten nuts in step (8), and now
tighten nuts in step (17).
19.
Slide main channel to align road lock
bracket with bottom hole in Ram I-
beam and insert top of ram cylinder
into mounting bracket.
20.
Install road lock pin and secure with
lynch pin.
Warning! Personal protective
equipment should be worn during
all service procedures. This
includes, but not be limited to, safety
glasses, hearing protection, protective
gloves, and steel toe footwear
KD-28
K-29
21.
Hook a pulling strap to one (1) of the
spring’s upper spring clip. Pull spring
up towards the top of the assembly and
carefully hook spring u-clip onto
spring bracket.
22.
Repeat step twenty-one (21) for other
spring.
KD-30