Kendo ST737, Operating Instructions Manual

23

22

Timer review - changing and erasing record settings

Press 

MENU

.

Choose "Timer Program"  then press 

OK

.

1

2

Select the program you want to change or erase by
pressing 

PR+

or 

PR-

. 

Press 

OK

to confirm.

Changing a setting

Select the details you want to change by pressing       or       .

Use the number buttons 

0

to 

9

to change the settings. Use

PR+

to select the AV channel, to change the tape speed and

to switch VPS/PDC on and off.

When you have made all the changes, press         or
until you see ‘OK : confirm’ on the bottom line of the screen.
Press 

OK

.

Remember to load a cassette and 

switch the video off

by

pressing .

TIMER  PROGRAM

PR START END DATE

01   18:10   20:30  19/07

03   21:20   22:20  14/07

PR+/-:SELECT
OK:CONFIRM      MENU:END

TIMER  PROGRAM (ONCE)

PR

03

START TIME

21:20

END TIME

22:20

START DATE

14/07(WED)

TAPE SPEED

SP

VPS/PDC

ON

0 :ERASE

/    :CORRECT   MENU:END

TIMER  PROGRAM

PR START END DATE

01   18:10   20:30  19/07

03   21:20   22:20  14/07

PR+/-:SELECT
OK:CONFIRM      MENU:END

3a

Erasing a setting

Press the number 

0

.

Press 

OK

to confirm.

Press 

MENU

twice to end.

3b

TIMER  PROGRAM (ONCE)

PR

01

START TIME

18:10

END TIME

20:30

START DATE

19/07(MON)

TAPE SPEED

LP

VPS/PDC

ON

PR+/-:SELECT (AV1/AV2)

0-9 : SETUP (PR)

/

:CORRECT

OK:CONFIRM           MENU:END

Clock and counter display

◆

The counter counts in real time from when you load the cassette. This does not have to be at the beginning

of the cassette. The counter does not count unrecorded parts of the cassette.

◆

If you rewind the cassette, the counter will count backwards, if you rewind beyond the zero position, the

counter counts in negative values for example,  – 0:01:15.

This display will only appear when there is a cassette in the video.

STOP   SP            PR01   ARD

14:00  12/07   

STEREO  ON

Press 

once to display the time and date.

Press 

twice to display the counter time and how long is

left to the end of the cassette.

Press 

three times to clear the screen.

A

A

A

Remaining time and cassette length

Choose ‘Tape Remain’ by pressing 

OK

. 

Press 

PR+

or 

PR-

to select the length of your current cassette.

Press 

OK

to confirm. The display will show how long is left to the

end of the cassette.
This will be displayed for several seconds only.

Finding the counter zero position

Press 

MENU

and choose ‘Tape Control’ by

pressing 

PR+

and then 

OK

.

Choose ‘Go to Zero’ by pressing

PR-

and

then 

OK

.

The video will wind to the position 0:00:00
and stop.

REW    SP                   
GO TO ZERO

0:02:13

TAPE CONTROL

TAPE REMAIN

E-240  01:27

TAPE REMAIN
GO TO ZERO
COUNTER  RESET

E-180
E-240
E-300

PR+/-:SELECT
OK:CONFIRM    MENU:END

PR+/-:SELECT
OK:CONFIRM    MENU:END

This display will only appear when there is a cassette in the video.

Press 

MENU

and choose ‘Tape Control’ by pressing 

PR+

and then 

OK

This display will only appear when there is a cassette in the video.

V

These buttons are used
on the following three
pages.

If didn’t wind tape (PLAY), it doesn’t appear the tape remain time.

During fast forward or backward, the tape remain time can be displayed only in
“VCR mode”. To change between VCR- and TV mode, press TV/VCR button.