-13-
-
Each loading ramp also has a Loading Ramp Storage Loop welded
approximately 2/3rds of the way down the innermost ramp tube on
the small folding side
6.2 Loading Ramp Configuration
-
The loading ramp sections will be marked left and right when you
receive your trailer from Kendon; please be sure to understand
which section is which before removing the marking tag
-
The left loading ramp section will feature the small 12” fold-out side
on top, when connected to the Rear Section, and will fold out away
from the centerline of the trailer to the left
-
The right loading ramp section will feature the small 12” fold-out side
on top, when connected to the Rear Section, and will fold out away
from the centerline of the trailer to the right
-
Be sure to use and store the loading ramp sections on their correctly
corresponding sides of the trailer
6.3 Loading Ramps, Storage for towing
-
Store your loading ramps under the rear section of the trailer
-
For storage while towing, slide the ramps all the way under the rear
section and secure in place with locks or locking pins using the
Loading Ramp Hooks on the end of the trailer’s Rear Section and
the Loading Ramp Storage Loop at the end of the loading ramp
-
Be sure both ramps are securely locked in place before towing
-
Examples of the ramps properly locked in place for towing:
