Kenmore 110.66132*410, Use & Care Manual

6

Towels and 

bedding

Sanitize*

Wrinkle Guard™ 

Cycle Signal

Extended high-heat drying cycle 

intended to help sanitize items such as 

bedding and towels. This cycle is not 

recommended for all fabrics. For best 

results, run cycle to completion, do not 

interrupt. 

NOTE:

 Steam portion of Wrinkle 

Guard™ w/Steam option is disabled for 

this cycle.

Jackets, 

comforters, pillows

Bulky/

Bedding

Damp Dry Signal

Wrinkle Guard™ 

Cycle Signal

Use for drying large, bulky items; do not 

overfill dryer drum. 

Heavyweight items 

such as towels and 

jeans

Heavy 

Duty

Damp Dry Signal 

Wrinkle Guard™ 

Cycle Signal

Use for drying large or heavy items. 

Corduroys, work 

clothes

Normal

Damp Dry Signal 

Wrinkle Guard™ 

Cycle Signal

Medium to large loads of mixed fabrics 

and items.

No-iron fabrics, 

cottons, perm 

press, linens, 

synthetics

Casual

Damp Dry Signal 

Wrinkle Guard™

Cycle Signal

For normal light- to medium-weight 

fabrics. Drying time varies based on 

fabric type, load size, and dryness 

setting.

Lingerie, blouses, 

washable knit 

fabrics

Delicates

Damp Dry Signal 

Wrinkle Guard™ 

Cycle Signal

For gently drying delicate items.

NOTE:

 Steam portion of Wrinkle 

Guard™ w/Steam option is disabled for 

this cycle.

Items to dry:

Cycle:

Dry Temp:

Dry Level

†

:

Available 

Options:

Cycle Details:

SENSING CYCLES –

 Senses moisture in the load and shuts off when the load reaches the selected dryness level. The dry temperature 

shown is the default temperature. This setting can be modified on some cycles but is not retained for future drying with this cycle. The 

dryness level shown is the default dryness setting. This setting can be changed on some cycles and will be retained for future drying with 

this cycle. Available options in 

bold

 are default settings for that cycle.

To get the most energy savings and enhanced fabric care from your dryer, use the Sensing cycles. These cycles measure the drying 

air temperature and moisture levels to turn the dryer off once the load reaches the selected dryness level. For electric models, dryer 

performance and results may vary with service voltage less than 240.

Damp Signal

Touch to select the Damp Signal to on or off. When 

selected, a series of beeps will sound when the load is 

damp, but not completely dry. This will allow you to take 

clothes out of the load that do not need to dry completely. 

This option is not available on Sanitize, Steam Refresh, 

and the Timed cycles.

CYCLE STATUS LIGHTS

The indicator bar on the right side of the control will let you 

know what stage of the drying cycle is in process. 

Damp

This indicator shows that the load is partially dried and 

items that you may wish to hang up or iron while still 

damp may be removed.

Cool Down

The dryer has finished drying with heat, and is now 

tumbling the load without heat to cool it down and  

reduce wrinkling.

Complete

This will indicate that the selected cycle has ended and 

the load may be removed from the dryer. If Wrinkle 

Guard™ option has been selected, the dryer may continue 

to tumble the load, even if the Complete indicator is lit.

Wrinkle Guard™

This indicator will light if the Wrinkle Guard™ option has 

been selected and is running. The dryer will periodically 

tumble the load for up to 150 minutes after the cycle has 

ended.

Check Lint Screen

The Check Lint Screen indicator light will flash as a 

reminder to clean the lint screen. It will flash until the door 

is opened or a cycle is started. It will turn off when the 

dryer is turned off.

START/PAUSE BUTTON

Touch and hold START/PAUSE button for up to 3 seconds or 

until the dryer starts to begin the selected cycle; touch again 

to pause a cycle.

6

7

*  Extended high-heat drying cycle intended to help sanitize items such as sheets and towels. This cycle is not recommended for all  

  fabrics. For best results, this cycle should be run to completion to ensure sanitization and do not interrupt cycle.  

†

If loads do not seem as dry as you would like or are drier than you would like, select More Dry or  

  Less Dry next time you dry a similar load.

CYCLE GUIDE – SENSING CYCLES