EN-9
OPERATION
CLOCK SETTING
When the microwave oven is plugged into an outlet, " : 0" will display.
(1) Press once, "12 H" will appear in the display to enter 12 hour clock numbering.
Press Twice, "24 H" will appear in the display to enter 24 hour clock numbering.
(2) Press the number pads and enter the current clock time. For Example, if the time is now 8:30,
press "8,3,0" in order. The numbers will flash in the display.
(3) Press to finish clock setting, ":" will flash and the numbers will appear as a clock time
in the display.
Note : If you make a number entry mistake while in the process of setting clock, press
to start over.
MICROWAVE COOK
1) To begin cooking at full power (700 watts), press number pads to set cooking time and press
Start.
2) To adjust the power level setting, press key before entering a cooking time. Press key
as many times as necessary until display reads the power level you want. See POWER LEVEL
section on next page.
3) Once power level has been adjusted, press number pads to select a cooking time. Note: You
cannot adjust the power level if you have first entered the cooking time.
4) Press to begin cooking.
Example: To cook food at 350 watts for 15 minutes.
a, Press , "700" displays.
b, Press 5 times, "350" displays.
c, Press "1, 5, 0, 0" in order for 15:00 to appear in the display.
d, Press to start cooking.
STANDING TIME
Standing time means that after the timed cooking period ends, food should be allowed to stand
either inside or outside the oven to completely finish cooking. Outside oven standing time will
allow the oven to be available for other use.
