12
RECEIVER SETTING INSTRUCTIONS
SENSOR ICON (1)
flashes, indicating
signal is being received from the main unit.
If no signal is being received, the icon will
not appear.
BATTERY POWER INDICATOR (2)
displays
battery power level from full to low power:
When low, indicator will flash.
SOUND ON/OFF (3)
Alert will sound when
there is a receiving error and/or when
BUCKET FULL (6)
is activated. The sound
alert is optional and may be turned off using
SWITCH (14)
.
FAN ON INDICATOR (5)
rotates when the
fan is on.
BUCKET FULL (6)
icon flashes when the
bucket is full. A sound alert is also an option
(See Sound On/Off.)
PUMP ON (7)
icon flashes when pump
feature has been pre-selected on the main
unit and the pump is operating.
TEMPERATURE (8)
display shows the
current temperature near the main unit.
HUMIDITY (9)
display shows the current
humidity level near the main unit when re-
ceiver and main unit are operating properly.
HANGER HOLE (10)
for optional wall
mounting.
SETTING PREFERENCES
Press
SET (11)
once and hold down
for 3 seconds to enter the "Setting
Mode."
SET HOUR OF DAY (4)
Press
SET (11) a second time. Hour will
begin flashing. Then press + (13) or
– (12) to set the hour 1-12 AM
or 1-12 PM.
SET MINUTES
(4)
Press SET (11) a
third time. Minutes will begin flashing.
Use to set the minutes 00-59.
24-HOUR CLOCK
(4)
Press SET
(11) a fourth time. Use to
toggle between 12H/24H clock.
FARENHEIT OR CELSIUS
(8)
Press
SET (11) a fifth time. Use to
toggle between
°
C/
°
F
EXIT SETTING MODE
by pressing
SET (11) a sixth time.
+
-
+
-
+
-
+
-
