background image

 

13

 

B)

 CLEANING THE FILTER 

 

Clean the air filter once every two weeks to remove dust build-up and keep the fan in top performance. 

 

Remove the filter: Pull out the filter cover and remove the air filter from the filter cover.  

 

 
 

 
 

 
 

 

 

Cleaning: Wash the air filter by immersing it in lukewarm water with a mild detergent. Rinse the filter 
and dry it in a dark place.  Do not put in direct sunlight. 

 

Replace the filter: Attach the filter to the filter cover using the attachment hooks on the inner surface of 
the cover. Put the filter cover back to the unit.  

 

C) CLEANING THE EXTERIOR 

Moisten a soft cloth with mild detergent and water to wipe the unit clean. Be sure not to use a soaking wet 

cloth.   
 

 
D) DRAINAGE/EXTENDED PERIOD OF NON-USE 

If the air conditioner will not be used for a long period of time, remove the 

bottom rubber plug from the back hole and attach a section of the Continuous 
Drain Hose and completely drain the unit of water. 

 
 

 
 

 
 

 

Follow cleaning instructions A-D. 

 

Perform reverse Installation Instructions.  

 

Repack the unit in its original package and store 

upright 

in a cool dry place.   

Important

: Always store and transport the air conditioner upright to maintain the compressor in a 

proper condition.

 

 

 
 

 

 

MODEL 35132 

VOLTAGE 120V~60Hz 

POWER CONSUMPTION 

COOLING 

HEATING 

 

1400W 

1200W 

COOLING CAPACITY 

HEATING CAPACITY 

12,000BTU/h 

12,000BTU/h 

DEHUMIDIFYING CAPACITY (30°C, RH80%) 

60L/Day 

NOISE LEVEL (Indoor use) 

53dB(A) 

AIR CIRCUALTION (m³/h) 

450 

COOLING AGENT 

R410A 

REMOTE CONTROL 

INCLUDED 

TIMER 0-24h 

DIMENSIONS (WxDxH) 

30cmx50.5cmx77.8cm / 12”x20.2”x31.12” 

NET WEIGHT 

29.5 kg / 65Lbs 

 

 

 

TECHNICAL SPECIFICATIONS 

STORAGE 

Summary of Contents for 35132

















Reviews: