8
6. SPEED
Pressing this button sets the ventilation speed to “
(low)”, “
(medium)”, “
(high)” or “AUTO
(Automatic)”. If “AUTO” is selected, the ventilator operates at temperature differences larger than 9
degrees at top speed. If the temperature reduces to a difference smaller than 4 degrees, the ventilator
switches to middle blower position. If the temperature reduces further until the target temperature, the
ventilator switches to the lowest blower position.
7. TIMER
Programmable timer button for delayed start up or delayed shutdown
How to program a delayed start up
This function is used to set the number of hours delay before the appliance comes on. Proceed as follows:
Press [TIMER]
button
in Stand-by mode
(unit is plugged in but not in operation, no display on
the panel), to set the number of hours delay before the appliance comes on.
Select the required function (cooling, heating, and dehumidification), wait until the unit displays the
ambient temperature, and then set the desired temperature.
After the set number of hours has expired, the unit starts automatically.
If you press the [POWER]
button before the time has expired, the delayed start up will be cancelled,
the unit turns on and can be operated in the required operating mode.
How to program a delayed shutdown
This function is used to set the number of hours delay before the appliance goes off. Proceed as follows:
Start the unit in required function (cooling, heating or dehumidifying)
Press the [TIMER]
button
during operation
and enter the required number of hours delay
before the appliance goes off.
After the flashing of the number of hours on the LED has stopped, can select the required
temperature.
After the set number of hours has expired, the unit shuts down automatically.
If you press the [POWER]
button before the time has expired, the unit shuts down.
8. SLEEP
This function is ideal for the night as it gradually reduces operation of the appliance. The sleep function
maintains the room at optimum temperature and with silent operation.
When you use the sleep function, first set the timer as described in the functions.
Delayed start and delayed shutdown: Press the [TIMER]
button until the required hours appear on the
display. After the hour display, the display switches automatically to the previous set temperature display.
To change the temperature, press the [TEMP+]
or [TEMP-]
buttons. With each press on the button,
the temperature increases or decreases by 1°C.
