42
1
4
3
2
5
3
4
1
4
2
5
3
1
1
9
0
5
3
4
2
3
4
5
(5/8")
(2.2cm)
3
1
2
1/8"
(0.4 cm)
1
5
4
3
2
Zipper Sewing
Stitch selector:
5
Stitch width:
6.5
Stitch length:
2
Needle thread tension:
2 to 6
Presser foot E:
Zipper foot
1
4
3
2
• To snap on the zipper foot
Groove
Pin
To sew left side
To sew right side
Fit the pin on the zipper foot into the groove on the foot
holder.
* To sew the left side of the zipper, attach zipper foot on
the right-hand side of pin.
* To sew the right side of zipper, attach the zipper foot on
the left-hand side of pin.
2
• Fabric preparation
Right (top) side of fabric
Wrong (bottom) side of fabric
Bottom seam
Zipper bottom stop position
Basting stitch
Place the right (top) sides of the fabric together. Sew a
bottom seam 5/8" (2.2 cm) from the right edge to the
estimated zipper bottom stop position . Sew in reverse
a few stitches to lock.
Increase the stitch length to 4, set needle thread tension
to 0, and sew basting stitch the entire length of the
zipper sewing.
1
1
1
3
3
4
4
5
5
• To sew
1/8" (0.4cm) fabric margin
Zipper teeth
Zipper tape
Attach zipper foot on right-side of pin.
Fold back the upper layer seam allowance. Fold back
the lower layer seam allowance to leave a 1/8" (0.4 cm)
margin of fabric .
Place zipper teeth next to margin edge and pin margin to
zipper tape.
Align zipper foot with margin edge. Return thread tension
and stitch length to original settings. Sew a seam the
entire length of zipper tape, removing pins as you go.
Before reaching pull-tab, stop the machine with needle in
the fabric and raise the foot, then unzip a few inches to
clear a path for the stitch.
Remove fabric and close zipper.
1
3
2
1
1
