Kenmore 592-89102, Use & Care Manual

15

Cycles

Models : 592-89107*, 592-89117*, 592-89108*, 592-89118*,         
                592-89102*

Normal 

Use this cycle to dry loads such as cotton, underwear, and linen.

Heavy Duty 

Use this cycle to get high heat for heavy fabrics such as jeans, 

corduroys, or work clothes.

Perm Press 

Dry wrinkle-free cottons, synthetic fabrics, knits, and permanent 

press fabrics automatically. The cycle minimizes wrinkling by 

providing a longer unheated cool-down period at the end of the 

cycle.

Delicates 

The Delicates cycle is designed to dry heat-sensitive items at a 

low drying temperature.

Timed Dry

Time Dry allows you to select the desired cycle time in minutes.
Turn the Cycle Selector dial to Time Dry, then press the Adjust 

Time up arrow to set the drying time.
Press the arrow repeatedly to scroll through the time settings.

Wrinkle Release 

The Wrinkle Release cycle will release wrinkles from items that 

are clean, dry, and only slightly wrinkled, such as clothes from 

a crowded closet, suitcase or items that have been in the dryer 

too long after the cycle has ended. Wrinkle Release can be used 

with any temperature selection.

Air Fluff 

The Air Fluff cycle tumbles the load in room temperature air.

Options

Digital Graphic Display

The display window shows the estimated time remaining in the 

cycle after the Start/Pause button is pressed. The estimated 

time remaining may fluctuate as the cycle progresses.
The Drying light will illuminate and remain lit until the cycle is 

complete.
When your Dryer is in the cool-down phase, the Cooling light will 

illuminate.
When your Dryer is in the wrinkle prevent phase, the Wrinkle 

Prevent light will illuminate.
When the cycle is complete, “END” will appear in the display 

panel until the Dryer door is opened or the Power key is pushed.
If your Dryer is paused during a cycle, the indicator lights will 

blink until the Start/Pause button is pressed.

Dry Level Selection Button

To select the dry level in the Normal, Heavy Duty, or other 

Sensor Dry cycles, press the Dry Level button. An indicator light 

will illuminate next to the desired dryness level.
Press the button repeatedly to scroll through the settings. Larger 

or bulkier loads may require the More Dry setting for complete 

dryness.
The Less Dry setting is best suited for lightweight fabrics or for 

leaving some moisture in the clothing at the end of the cycle.

Use for items that lay flat or hang to dry.

Temp Selection Button

To select the correct temperature for the load, press the Temp 

button. An indicator light will illuminate next to the desired 

temperature. Press the button repeatedly to scroll through the 

settings.

■ 

High - For sturdy cottons or those labeled Tumble Dry.

■ 

Medium - For permanent press, synthetics, lightweight 

cottons, or items labeled Tumble Dry Medium.

■ 

Low - For heat sensitive items labeled Tumble Dry Low or 

Tumble Dry Warm.

■ 

Extra Low - Provides the lowest heated dry temperature 

possible.

ENGLISH

Kenmore_Dryer-Good-02687A-01_EN.indd   15

2009-07-02   ¿ÀÈÄ 3:21:25