17
Drying Rack
Installing the drying rack
1.
Open the Dryer door.
2.
Position drying rack in tumbler, placing the front lip of the
drying rack on the top of the lint filter.
3.
Place the rear legs in the two recessed areas of the dryer’s
back wall then push down the middle of the drying rack to
fix.
4.
Place the items to be dried on the rack, leaving space
between them so air can circulate.
5.
Close the Dryer door.
6.
Use the Time Dry cycle. Select the time according to the
moisture and weight of the items. Start the Dryer. It may be
necessary to reset the timer if a longer drying time is needed.
SUGGESTED ITEMS
SUGGESTED TEMP.
SETTINGS
Washable sweaters
(block to shape and lay flat on
rack)
Low or Extra Low
Stuffed toys
(cotton or polyester fiberfilled)
Low or Extra Low
Stuffed toys
(foam or rubber-filled)
Air Fluff
Foam rubber pillows
Air Fluff
Sneakers
Air Fluff or Heat (Extra Low)
WARNING:
Drying foam rubber, plastic, or rubber on a heat
setting may cause damage to the item and lead to a fire hazard.
NOTE:
You must remove dryer rack for normal tumbling. To
remove the dryer rack, lift it straight up and out of the dryer.
ENGLISH
Kenmore_Dryer-Good-02687A-01_EN.indd 17
2009-07-02 ¿ÀÈÄ 3:21:27
