13
CYCLES
SOIL LEVEL
TIME (mins.)
Without options
Water Usage
Gallons
Liters
Typical
Maximum
SmartWash
™
HE
Takes the guesswork out of cycle selection. The sensors
in the dishwasher automatically adjust the cycle length,
temperature and water changes based on the soil
load. This cycle contains additional sensor decisions
when compared to other cycles.
Light
105
110
3.6
13.6
Medium
110
115
4.5
17.0
Heavy
115
120
6.0
22.6
Pots & Pans *
Cleans items having baked-on or hard dried food soils.
These items may require soaking or hand scouring.
All Soil Levels
130
130
6.8
25.6
Normal Wash
Thoroughly cleans normal loads having loosely
attached normal soiling.
Light
105
120
2.3
8.7
Medium
120
135
5.0
19.0
Heavy
135
155
7.1
26.7
China Gentle
Designed to be used with your fragile china and
glassware, allowing you to get it perfectly clean
without the hassle of hand washing or worry of
damage in the dishwasher.
All Soil Levels
80
80
3
11.3
Fast Wash
Cleans lightly soiled dishes and reduces overall wash
time. Use this cycle to clean glasses and dessert dishes
that may need to be re-used at the same event
All Soil Levels
59
59
3.9
14.9
Adding options will increase or decrease the cycle time. See “Options” information section.
* The cycle is NSF certified.
DISHWASHER CYCLES AND OPTIONS
NSF INFORMATION
A dishwasher or dishwasher cycle that is certified by the NSF
international meets very strict requirements of wash time
and water temperature to ensure dishware and kitchenware
sanitization. These requirements are explained in the
document NSF/ANSI 184, Residential Dishwashers. More
information on NSF Certification is available at the NSF
website,
http://www.nsfconsumer.org/home/appliances.asp.
Your dishwasher is NSF certified. The dishwasher cycles
that are NSF certified are shown in the chart above. When
these cycles are complete, the “Sanitized” indicator on your
dishwasher control panel will illuminate. However, if your
household water supply is too hot your dishwasher’s heating
time may be reduced, and the Sanitized indicator may not
illuminate.
The cycle times listed in the Use and Care Manual are based
on normal soil loads and 120°F incoming water and will vary
based on your actual conditions.
NOTE: Only sanitizing cycles have been designed to meet the
requirements of 6 for soil removal and sanitization efficacy.
There is no intention, either directly or indirectly, that all
cycles on a certified machine have passed the sanitization
performance test.