Kenmore 7116x, Use & Care Manual

8

Note:

 The time of day must first be set in order to operate the

oven.

To Set the Clock

When the range is first plugged in, or when the power
supply to the range has been interrupted, the display will
flash "12:00".

1.

Press 

.

2.

Within 5 seconds, press and hold the 

 or

until

the correct time of day appears in the display.

To Set the Minute Timer:

1.

Press 

.

2.

Press the 

to increase the time in one minute

increments. Press and hold the 

 to increase the

time in 10 minute increments. The timer can be set for
any amount of time from 1 minute to 11 hours and 59
minutes.

Note:

 If you press the 

 first, the timer will advance to

11 hours and 59 minutes.

3.

The display shows the timer count down in minutes
until one minute remains. Then the display will count
down in seconds.

4.

When the set time has run out, the timer will sound a 3

second beep. 0:00 will appear in the display until 

is pressed.

Note: 

While the minute timer is counting down, the “:” will

flash. The minute timer does not start or stop cooking. It
serves as an extra timer in the kitchen that will beep when
the set time has run out. The minute timer can be used
alone or during any of the other oven functions. When the
minute timer is in use with any other function, the minute
timer will be shown in the display. To view other functions,
press the pad for that function.

To Change the Minute Timer while it is in use:

While the timer is active and shows in the display, press
and hold the 

 or 

 to increase or decrease the time.

To Cancel the Minute Timer before the set time has

run out:

 Press 

.

To Set or Change the Temperature for Baking

The oven can be programmed to bake at any temperature
from 170°F to 500°F.

To Set the Controls for Baking:

1.

Press 

 . "— — —°" appears in the display.

2.

Within 5 seconds, press the 

 or 

. The display

will show "350°F." By pressing and holding the 

 or

, the temperature can then be adjusted in 5°F

increments.

3.

When the 

 or 

is released, the oven will begin

heating to the selected temperature. When the
displayed temperature reaches the desired baking
temperature, the control will beep one (1) time.

4.

To cancel the baking function, press 

.

To Change the Oven Temperature after Baking has
Started:

1.

Press 

 and make sure the bake temperature is

displayed.

2.

Press the

 or 

 to increase or decrease the set

temperature.

Setting Oven Controls

Changing the Temperature Display Mode

(some models)

The electronic oven control temperature display mode was
factory preset to display (Fahrenheit) °F oven tempertaures.
Note: Oven cooking temperatures may be set from 170°F to
500°F (77°C to 260°C).

To change the Temperature Display Mode to °C
(Celsius) or from °C to °F 

(do not use Bake or Broil while

changing the Temperature Display Mode)

:

1.

Press & hold the 

 key pad for 6-8 seconds until 

FFFFF

 or

CCCCC

 appears in the display. 

Note:

 At this time the display

will show the current Temperature Display Mode
whether set for 

FFFFF

 or 

C 

C 

C 

C 

C 

.

2.

Press the 

 key pad once to choose the (Fahrenheit)

°F mode; or press  the

key pad once to choose the

(Celsius) °C mode.

3.

After 5 seconds, the display will flash. To accept the
change, wait 5 more seconds until the oven control
beeps once. To complete the change skip step 4 below,

OR

;

4.

If at any time during the process of changing the
Temperature Display Mode 

(

FFFFF

 or 

CCCCC

 ) you decide the

change is not desired, press the 

 key pad before

the oven control beeps once to 

cancel

 the process.

5.

The control will beep once. The display will then return
to the time of day with any temperature display mode
change you may have requested.