USING YOUR REFRIGERATOR
22
REFRIGERATOR SHELVES
The shelves in your refrigerator are adjustable to meet
your individual storage needs. Your model may have
glass or wire shelves.
Storing similar food items together in your refrigerator and
adjusting the shelves to fit different heights of items will
make finding the exact item you want easier; it will also
reduce the amount of time the refrigerator door is open,
saving energy.
IMPORTANT:
Do not clean glass shelves with warm
water when they are cold. Shelves may break if exposed
to sudden temperature changes or impact, such as
bumping. For your protection, glass shelves are made
with tempered glass, which will shatter into small pebble-
sized pieces.
NOTE:
Glass shelves are heavy. Use special care when
removing them to avoid dropping them.
Adjusting Shelves
Remove shelves from the shipping position and replace
shelves in the position you want.
• To remove a shelf
—Tilt up the front of the shelf. Lift up
the back and pull out the shelf.
• To reinstall a shelf
—Tilt up the front of the shelf and
guide the shelf hooks into the slots at a desired height.
Then lower the front of the shelf so that the hooks drop
into the slots.
• Folding a shelf
—You can store taller items such as a
gallon container or bottles by simply pushing the front
half of shelf underneath back half of shelf.
Pull toward you to returm to a full shelf.
BOTTLE HOLDER (795.7878* Model Only)
Bottles can be stored laterally with this bottles holder.
It can be attached to any shelf.
Bottles holder can be removed by pulling it straight out
and installed by placing it at the end of the shelf you want
and pushing it inward.