9
Before Setting Surface Controls
Check Burner Cap Placement Before Operating the
Surface Burners
To prevent flare-ups and avoid creation of
harmful by-products, do not use the cooktop without all burner
caps properly installed to insure proper ignition and gas flame
size.
On round style burners, the burner cap lip (
snug into the center of burner head and rest level. Refer to
for correct and incorrect burner cap placement. Once
in place, you may check the fit by gently sliding the burner cap
from side to side (
) to be sure it is centered and firmly
seated. When the burner cap lip makes contact inside the
center of the burner head you will be able to hear the burner
cap click. Please note that the burner cap should not move off
the center of the burner head when sliding from side to side.
Check and be sure that all oval style (some models) burner caps
are correctly in place on oval burner heads.
It is very important to be sure that all surface burner caps and
burner grates are properly installed and in the correct locations
before operating the cooktop burners.
Remember:
•
Always keep surface burner caps in place whenever using a
surface burner.
•
When placing the burner caps, be sure that all burner caps
are seated firmly and rest level on top of burner heads.
•
For proper flow of gas and ignition of burners do not allow
spills, food, cleaning agents or any other material to enter
the gas orifice port opening.
Figure 1: Burner cap on burner head
Figure 2: Correct placement (L) Incorrect placement (R)
Figure 3: Moving cap gently until seated properly
Burner cap lip
Burner cap
Burner head
Correct burner cap
placement
Incorrect burner cap
placement
Summary of Contents for 790.4260 Series
Page 43: ...2500 10 ...
Page 44: ......