background image

9

Before Setting Surface Controls

Check Burner Cap Placement Before Operating the 
Surface Burners

 To prevent flare-ups and avoid creation of 

harmful by-products, do not use the cooktop without all burner 
caps properly installed to insure proper ignition and gas flame 
size.
On round style burners, the burner cap lip (

Figure 1

) should fit 

snug into the center of burner head and rest level. Refer to 

Figure 2

 for correct and incorrect burner cap placement. Once 

in place, you may check the fit by gently sliding the burner cap 
from side to side (

Figure 3

) to be sure it is centered and firmly 

seated. When the burner cap lip makes contact inside the 
center of the burner head you will be able to hear the burner 
cap click. Please note that the burner cap should not move off 
the center of the burner head when sliding from side to side. 
Check and be sure that all oval style (some models) burner caps 
are correctly in place on oval burner heads. 

It is very important to be sure that all surface burner caps and 
burner grates are properly installed and in the correct locations 
before operating the cooktop burners.

Remember:

Always keep surface burner caps in place whenever using a 
surface burner.

When placing the burner caps, be sure that all burner caps 
are seated firmly and rest level on top of burner heads.

For proper flow of gas and ignition of burners do not allow 
spills, food, cleaning agents or any other material to enter 
the gas orifice port opening.

Figure 1:  Burner cap on burner head

Figure 2:  Correct placement (L) Incorrect placement (R)

Figure 3:  Moving cap gently until seated properly

Burner cap lip

Burner cap

Burner head

Correct burner cap

placement

Incorrect burner cap

placement

Summary of Contents for 790.4260 Series













































Reviews: