REFRIGERATOR INSTALLATION
8
LEVELING THE REFRIGERATOR DOOR
Place level on refrigerator shelf as shown below.
Raise the front of the refrigerator enough so the doors
close freely when opened halfway. The refrigerator
should slope ¼” (6.35 mm) to ½” (0.127 mm) from front
to back.
Right leveling leg
9
Left leveling
leg
If your refrigerator is not level, insert a flat blade
screwdriver into the grooves of the leveling legs (shown
in picture below). Rotate legs clockwise to raise or
counterclockwise to lower the front of the refrigerator.
REFRIGERATOR INSTALLATION
HANDLE REMOVAL (TYPE 1)
(Identify your handle type)
NOTE:
It is ALWAYS recommended to remove the
refrigerator doors when it is necessary to move the
refrigerator through a narrow opening. If necessary,
follow the directions below to remove the door handles.
•
NOTE:
If
¼
Loosen the set screws with a ” (2.38 mm) Allen
wrench and remove the handle.
the handle mounting fasteners need to be
tightened or moved, use a ” (6.35 mm) Allen wrench.
Mounting
fasteners
Set screw
Allen wrench
3
32
Summary of Contents for 795.5131 Series
Page 33: ......