P/N 134023600 (0101)
indicator line to the left of the TOWELS, REGULAR, or
DELICATES/PERM PRESS setting. For loads requiring
less drying time, set the cycle selector on the indicator
line to the right.
•
DAMP DRY -
This setting is best for items you wish
to partially dry before hanging or ironing. Select
the temperature setting most suitable for the load.
•
WRINKLE-RID -
If the dried load cannot be
removed promptly at the end of the cycle, the cycle
selector will automatically advance to the
WRINKLE-RID setting. Unheated tumbling
continues for 10 minutes to help reduce wrinkling.
Timed Dry Cycle
This cycle provides up to 100 minutes of drying time
at the temperature selection of your choice.
Automatic Dry Cycle
•
TOWELS -
This setting is best for towel loads.
Select the REGULAR--HIGH HEAT temperature
setting.
•
REGULAR
- This setting is best for cotton items.
Select the REGULAR--HIGH HEAT temperature
setting.
•
DELICATES/PERM PRESS
- This setting is best for
delicate, knit, or perm press items. Select the PERM
PRESS--MEDIUM HEAT temperature setting for
permanent press items or the KNITS/DELICATES--
LOW HEAT temperature setting for most knit or
delicate items.
• Occasionally a load may seem too damp or overdried
at the end of the cycle. To increase drying time for
similar loads in the future, set the cycle selector on the
Cycle Selection
(continued)
Energy Saving Tips
• Keep the lint screen clean and exhaust the dryer
correctly.
• Sort laundry properly and select proper temperature
and cycle settings. Choose the Automatic cycle
whenever possible for accurate drying time.
• Dry only full loads. Single items and small loads
usually take longer to dry.
• Avoid overloading, adding wet items to a partially
dry load, and overdrying.
• Dry one load after another to take advantage of a
warm dryer.
• Opening the door needlessly causes warm air to
escape, which prolongs drying time.
• If possible, use the dryer on low humidity days.
• Install the dryer in an area where the room temperature
is at least 45°F (7°C).
