FI
3
RST
ENGLISH
STEpS
ALARM FUNCTIONS
Figure 4
For your convenience, Quick Freeze will automatically turn
off after a period of 72 hours and the freezer will return
to the previous temperature setting. You may deactivate
Quick Freeze at any time by pressing the Quick Freeze
button. The display will flash “CN” for one second and
return to displaying the last temperature setting.
CONTROL LOCKOUT
This feature prevents someone from accidentally changing
the temperature and quick freeze settings. To activate the
control lockout, press and hold the Alarm Reset button for
three seconds. “LO” (see Figure 5) will be displayed for 3
seconds indicating that the control panel is locked. “LO”
will be displayed if any button is pressed. To cancel Control
Lockout, press and hold the Alarm Reset button for three
seconds. When the lockout is cancelled, “UL” (see Figure
6) will display for 3 seconds, and then show the current
temperature setting. The Control Lock LED will extinguish.
Figure 5
Figure 6
SABBATH MODE
Sabbath mode provides the ability to disable all lights and
other electrical activity from occurring with the exception of
the compressor, which continues to operate automatically.
Sabbath mode is enabled or cancelled pressing the
Control Lock and Temp Display buttons at the same time
and holding for three seconds. When enabled, “Sb” will be
displayed for one second and then the display will turn off.
When cancelled, the current temperature setting will be
displayed and all functions resume normal operation.
MANUAL DEFROST
Manual defrost will force the freezer to enter an im-
mediate defrost cycle. The mode can be enabled or
cancelled by pressing the Quick Freeze and Alarm Reset
buttons simultaneously for five seconds. When active, “dF”
is displayed every half second. After thirty minutes, the
cycle will complete and the freezer will display the current
temperature setting and resume normal operation.
TEMpERATURE ALARM
If the cabinet temperature rises to a level above 23ºF
(-5ºC), the “Hi Temp” display indicator will illuminate. If the
temperature stays above 23ºF (-5ºC) for more than one
hour, a high temperature alarm will also be activated. The
control panel will beep every 5 seconds. You may stop the
beep by pressing the Alarm Reset button. The Hi Temp
display indicator will continue to be displayed until the
problem is determined, corrected and temperature once
again drops to a level below 23ºF (-5ºC). During the high
temperature condition, the display will show the actual
internal temperature until the set temperature is once
again reached. The display will then show only the set
temperature.
DOOR AJAR ALARM
The door alarm will activate if the door is open for more
than five minutes. There will be an audible beep every five
seconds and the “Door Ajar” indicator will illuminate. Press
the Alarm Reset button to turn the audible alarm (beep)
off. The “Door Ajar” indicator will remain on until the door is
closed.
